2014–2017 Jeep Cherokee

Community-sourced DIY repair guides for the 2014–2017 Jeep Cherokee, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

9-speed harsh shifting / lunging Owner-verified (2.4L Tigershark I4, 3.2L Pentastar V6)

No teardown access needed — this is a dealer software procedure. Ask the service writer specifically for the latest 9-speed TCM/PCM software; the TSBs only get applied if you complain about shift feel.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: auto press · auto press · auto press · dealer tech report · owner forum

No owner reports yet — fixed this yourself? tell us how

2.4L oil consumption Owner-verified (2.4L Tigershark I4)

Dipstick check takes a minute — check the oil at every fuel fill on the 2.4L. The consumption test and PCM/TCM reprogram are dealer procedures.

Typical difficulty: Moderate — based on 5 code guides for the oil repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA bulletin PDF · TSB text · owner forum · owner forum · auto advice column

No owner reports yet — fixed this yourself? tell us how

PTU failure / grinding noise Owner-verified (2.4L Tigershark I4, 3.2L Pentastar V6)

The PTU sits between the transmission and the front axle on AWD models. Diagnosis is a dealer scan for the specific DTCs; replacement is a dealer or well-equipped independent job.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA TSB PDF · NHTSA warranty bulletin · owner forum · auto press

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this Cherokee

P215C
2014–2017 Jeep Cherokee
PTU failure / grinding noise

What owners report

NHTSA recorded 1,406 complaints for the 2014–2017 Jeep Cherokee. 2016 was the worst year (1406 complaints). Most-reported areas: power train, engine, unknown or other.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Cherokee years →

Recalls

9 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2014–2017 Jeep Cherokee yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.