2020–2021 Ford Explorer Hybrid

Community-sourced DIY repair guides for the 2020–2021 Ford Explorer Hybrid, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

No-start with 'Stop Safely Now' — check 12V first (SSM 50151) Factory-documented (3.3L V6 hybrid (FHEV))

The owner-side takeaway is a 12V health check, not module replacement. If the hybrid throws hybrid-system codes at key-on, test or charge the 12V auxiliary battery first and clear low-voltage codes before authorizing any SOBDMC/SOBDMB module work.

Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: Ford SSM 50151 (via oemdtc) · Ford SSM 50151 full text (via ford.oemdtc) · NHTSA TSB document MC-10201604-0001 (via carandproblems) · owner discussion (SSM 50151 thread)

P0A6F on this Ford Explorer Hybrid — full diagnosis guide →

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this Explorer Hybrid

P0562
2020–2021 Ford Explorer Hybrid
No-start with 'Stop Safely Now' — check 12V first (SSM 50151)
P0A6F
2020–2021 Ford Explorer Hybrid
No-start with 'Stop Safely Now' — check 12V first (SSM 50151)
P0A72
2020–2021 Ford Explorer Hybrid
No-start with 'Stop Safely Now' — check 12V first (SSM 50151)
U3003
2020–2021 Ford Explorer Hybrid
No-start with 'Stop Safely Now' — check 12V first (SSM 50151)

What owners report

No NHTSA complaint data in our records for the 2020–2021 Ford Explorer Hybrid specifically. See NHTSA data for all Explorer Hybrid years →

Factory service bulletins

We don't have factory bulletin data for the 2020–2021 Ford Explorer Hybrid yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.