2013–2016 Fiat 500e

Community-sourced DIY repair guides for the 2013–2016 Fiat 500e, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

PIM voltage-transient propulsion-shutdown recall (S26 / 16V303) Factory-documented (all)

Free dealer recall. No parts: it is a software/calibration remedy. If your car already threw P1AEE or P0A1B, tell the studio so they can confirm the fix clears it.

Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).

Tips

Sources: NHTSA Part 573 report — 16V303000 (P1AEE/P0A1B, 16,549 cars) · recall history (16V303, PIM voltage spikes, propulsion shutdown)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this 500e

P0A1B
2013–2016 Fiat 500e
PIM voltage-transient propulsion-shutdown recall (S26 / 16V303)

What owners report

No NHTSA complaint data in our records for the 2013–2016 Fiat 500e specifically. See NHTSA data for all 500e years →

Factory service bulletins

We don't have factory bulletin data for the 2013–2016 Fiat 500e yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.