Community-sourced DIY repair guides for the 2016–2016 Dodge Journey, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Dealer-only repair — a connector and terminal replacement, not a sensor swap you can do in the driveway. If your 2016 Journey stalls intermittently, check this recall by VIN before replacing sensors.
Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).
Torque specs
Sensor/connector fasteners: verify — No owner-serviceable torque values for the dealer connector replacement; confirm against factory service info.
Tips
The root cause is NOT bad sensors — it is improperly manufactured crankshaft and/or camshaft sensor electrical connector terminals that make only an intermittent connection. That is why replacing the sensors yourself does not fix it; the fix is the connector and terminals.
Symptoms: engine stalls without warning while driving, engine 'no start' condition, and/or the malfunction indicator lamp. On a 2016 Journey built May 9–July 15, 2016, suspect this before paying for parts.
Documented free route: dealers replace the crankshaft and/or camshaft electrical connector and terminals free of charge (FCA campaign S89, NHTSA 16V-907, ~42,231 vehicles, recall began February 8, 2017).
Confirm coverage with FCA customer service at 1-800-853-1403; this is an intermittent electrical fault, so it may stall only occasionally before it gets worse.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
NHTSA recorded 387 complaints for the 2016–2016 Dodge Journey. 2016 was the worst year (387 complaints). Most-reported areas: engine, power train, electrical system.
16V461000 (24/06/2016) — POWER TRAIN:AUTOMATIC TRANSMISSION Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Chrysler Town & Country, Dodge Grand Caravan vehicles manufactured July 31, 2015, to April 18, 2016, 2016 Dodge Journey vehicles manufactured August 17, 2015, to January 29, 2016, and 2016…
18V332000 (17/05/2018) — ELECTRICAL SYSTEM:WIRING Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500…
16V907000 (16/12/2016) — ENGINE AND ENGINE COOLING:ENGINE Chrysler (FCA US LLC) is recalling certain model year 2016 Dodge Journey, Jeep Compass, and Jeep Patriot vehicles manufactured May 9, 2016, to July 15, 2016. The crankshaft or camshaft sensor may only work intermittently, causing the engine to stall.
16V273000 (06/05/2016) — STEERING:HYDRAULIC POWER ASSIST:HOSE, PIPING, AND CONNECTIONS Chrysler (FCA US LLC) is recalling certain model year 2009-2016 Dodge Journey vehicles manufactured July 31, 2007, to November 12, 2016. After exposure to cold temperatures, the power steering return hose may rupture at engine start-up causing a loss of…
4 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2016–2016 Dodge Journey yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.