2008–2009 Chevrolet Tahoe Hybrid

Community-sourced DIY repair guides for the 2008–2009 Chevrolet Tahoe Hybrid, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Auxiliary transmission fluid pump (bump/jerk) Factory-documented (6.0L V8)

The auxiliary pump and its control module live inside the transmission area; connectors sit just under the 12V battery. A DIY-capable owner with a hybrid-aware scan tool can check for the pump codes and clean the connectors, but pump-module replacement is dealer/trim-shop territory.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: owner forum · owner forum · GM PIP / NHTSA TSB PDF

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this Tahoe Hybrid

P0AC4
2008–2009 Chevrolet Tahoe Hybrid
Auxiliary transmission fluid pump (bump/jerk)
P0C2B
2008–2009 Chevrolet Tahoe Hybrid
Auxiliary transmission fluid pump (bump/jerk)

What owners report

No NHTSA complaint data in our records for the 2008–2009 Chevrolet Tahoe Hybrid specifically. See NHTSA data for all Tahoe Hybrid years →

Factory service bulletins

We don't have factory bulletin data for the 2008–2009 Chevrolet Tahoe Hybrid yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.