Every shift — or one specific shift — lands with a clunk, a jerk, or a bang you feel through the seat. Some harshness has innocent causes (cold fluid, a tired mount), and some is the transmission's control system failing to do its job. The pattern — all shifts, one shift, or only cold — separates them.
Cheapest and easiest first. Don't buy parts until the checks below point at one.
Low fluid lets the pump suck air and pressure control goes erratic; old fluid loses its friction properties. The first check on any shift complaint, and the cheapest fix if it's just low.
Solenoids meter fluid to the clutches. A sticking solenoid slams one specific shift — 2nd to 3rd, say — while the others feel fine. Often stores codes.
A mount that's collapsed turns a normal shift into a felt thunk. If the whole drivetrain seems to rock on shifts and there's a clunk on takeoff too, suspect mounts before the transmission.
Many transmissions adapt shift pressure over time. After a battery disconnect or a fluid change, the adaptives reset and shifts can be harsh for a few drive cycles while it relearns — this one fixes itself.
If pressure regulation fails high, every shift slams. Usually comes with codes and sometimes a failsafe gear — the transmission protecting itself from its own pressure.
Worn friction elements slip and then grab, which feels like a bang. Usually arrives with high mileage, delayed engagement, and slipping between the harsh shifts — read the slipping guide too.
Harsh shifting alone is a drive-gently-to-diagnosis problem, not a tow — but keep it out of hard acceleration, which is what breaks the weakened parts. If harsh shifts come WITH slipping, a burning smell, fluid leaking, or the transmission stuck in one gear, stop driving it: slipping generates the heat that kills transmissions. See the transmission slipping guide.