You press the brake and the pedal pushes back in a steady rhythm — a throb through the pedal, sometimes through the whole car. It appears at a certain speed band and fades as you slow below it. A pulsing pedal is measuring something real: the rotor surface under the pad isn't uniform, and your foot is feeling every high and low spot.
Cheapest and easiest first. Don't buy parts until the checks below point at one.
Most 'warped rotors' aren't warped at all — they're rotors with pad material transferred unevenly onto the friction surface, usually from stopping hard and then holding the hot pads in one spot at a light. The deposit pattern is what throbs.
Rust or debris between the rotor hat and the hub, or a rotor installed without cleaning the mating surface, makes the rotor wobble microscopically — enough to pulse after some miles as the pads wear the high spots.
Sustained heat — towing, mountain descents, stuck calipers — can genuinely warp a rotor. Pairs with blue discoloration on the rotor face or a dragging-brake smell.
On slick surfaces, ABS pulses the pedal deliberately — faster, buzzy, accompanied by the ABS sound and usually a wet or icy road. That's the system working; don't lift off the brake.
A mild rotor pulse that the steering wheel turns into a shudder may really be worn bushings or ball joints making a small problem feel big.
Pulsation alone is not a tow — it's a book-the-brake-job problem, and stopping distances may be longer than you think. It becomes urgent if braking has gotten dramatically weaker, the pedal goes low, the brake warning light is on, or there's a loud grinding under the pulse. Then park it and read the soft pedal guide and the brake warning light guide before driving anywhere.