P2D4F

P2D4F: Hybrid/EV Battery Pack K Over Temperature

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

One section of your high-voltage battery - pack k - is running hotter than the computer allows. The car will cut power to protect it.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. High-voltage safety first: this code lives in the high-voltage system, which can carry lethal voltage. Only touch it if you are trained and equipped for HV service (insulated tools, HV gloves, service-plug procedure); everyone else should stop at scanning and hand the repair to a qualified EV/hybrid technician.
  2. Scan and record every pack section temperature - confirm which section is hot and how far above the rest it is. Tests: Failing battery cooling to that section (most common)
  3. Check that the battery cooling system (pump, fan, chiller) is actually operating. Tests: Failing battery cooling to that section (most common)
  4. Look at cell voltage balance; a section with weak or imbalanced cells works harder and runs hotter. Tests: Weak or imbalanced cells working harder and running hot
  5. Inspect cooling ducts and coolant paths to that section for blockage or leaks.
  6. If one section stays hot with good cooling and balanced cells, the pack needs professional evaluation - do not keep driving it hard.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$300 – $1500
Labor$300 – $700

Battery cooling system repair and pack health evaluation. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2D4F ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Reading pack section data needs a hybrid-capable scan tool; anything inside the pack is professional-only.

Watch this repair on YouTube

Parts & tools

Battery & charging toolkit — what the job actually takes

Torque specs: Terminal clamps: snug, typically 5–8 Nm. Over-tightening cracks the battery post.

Pro tip: Disconnect negative first, reconnect negative last. On module-heavy cars use a memory saver so you don’t lose radio codes and adaptations.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →