Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonRepeated over-temperature events damage the pack permanently - drive gently and get it diagnosed soon.
One section of your high-voltage battery - pack g - is running hotter than the computer allows. The car will cut power to protect it.
Key facts
P2D4B means hybrid/EV Battery Pack G Over Temperature. One section of your high-voltage battery - pack g - is running hotter than the computer allows. The car will cut power to protect it. WrenchFair's published fair-price range for this repair is $300–$1500 parts and $300–$700 labor at independent shops.
WrenchFair rates P2D4B a 4-of-5 DIY difficulty (“Reading pack section data needs a hybrid-capable scan tool; anything inside the pack is professional-only.”) with a “Diagnose soon” driveability rating: Repeated over-temperature events damage the pack permanently - drive gently and get it diagnosed soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
battery temperature warning on the dash
reduced power or turtle/limp mode
fast charging slowed or stopped
cooling fan running at full speed constantly
ev/hybrid system warning light on
charging may fail or be slowed
Likely causes
Failing battery cooling to that section (most common)
Weak or imbalanced cells working harder and running hot
Blocked cooling duct or low coolant in the pack loop
Biased temperature sensor (verify with a real thermometer)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
High-voltage safety first: this code lives in the high-voltage system, which can carry lethal voltage. Only touch it if you are trained and equipped for HV service (insulated tools, HV gloves, service-plug procedure); everyone else should stop at scanning and hand the repair to a qualified EV/hybrid technician.
Scan and record every pack section temperature - confirm which section is hot and how far above the rest it is. Tests: Failing battery cooling to that section (most common)
Check that the battery cooling system (pump, fan, chiller) is actually operating. Tests: Failing battery cooling to that section (most common)
Look at cell voltage balance; a section with weak or imbalanced cells works harder and runs hotter. Tests: Weak or imbalanced cells working harder and running hot
Inspect cooling ducts and coolant paths to that section for blockage or leaks.
If one section stays hot with good cooling and balanced cells, the pack needs professional evaluation - do not keep driving it hard.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$300 – $1500
Labor$300 – $700
Battery cooling system repair and pack health evaluation. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2D4B ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Reading pack section data needs a hybrid-capable scan tool; anything inside the pack is professional-only.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →