P2D31

P2D31: Intake Manifold Tuning Valve Exceeded Learning Limit Bank 1

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your intake manifold has flaps that change the airflow path for cold starts and different RPMs. The computer says they are not moving the way they should.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code and check whether it only sets on cold starts - this monitor is temperature-sensitive.
  2. Command the runner/tuning valve with a scan tool and watch actual versus commanded position. Tests: Learned position lost after repair - relearn needed
  3. Remove the actuator and try moving the flap shaft by hand - it should move smoothly with light resistance. Tests: Carbon seizing the flap shaft (most common)
  4. Clean carbon from the flap shaft and pivots; replace the actuator if the shaft moves freely but the actuator does not drive it. Tests: Carbon seizing the flap shaft (most common)
  5. Check the vacuum supply or electrical feed to the actuator per the service manual.
  6. Reassemble, clear the code, and cold-start the car to confirm the monitor passes.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $500
Labor$200 – $500

Intake runner flap cleaning or actuator replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2D31 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Getting to the intake flaps means removing intake plumbing; cleaning baked carbon off the shafts is the tedious part.

Watch this repair on YouTube

Parts & tools

Intake & throttle toolkit — what the job actually takes

Torque specs: Throttle body bolts: typically 8–12 Nm — verify spec.

Pro tip: Some cars need a throttle relearn after cleaning (scan tool or battery-disconnect procedure), or the idle will hunt.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →