P2D23

P2D23: Turbocharger Interstage Pressure Sensor A Circuit Low

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your engine has more than one turbo stage, and the pressure sensor sitting between the stages is reading wrong. The computer cannot manage boost properly without trusting that sensor.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code and log interstage pressure alongside the other boost sensors at idle and under load. Tests: Failed interstage pressure sensor (most common)
  2. Compare the interstage reading to the expected values - a sensor stuck at one value is a dead sensor. Tests: Failed interstage pressure sensor (most common)
  3. Inspect the sensor's wiring, connector, and pressure hose/tube for cracks, oil contamination, or blockage. Tests: Damaged wiring or corroded connector at the sensor
  4. Smoke-test or pressure-test the charge plumbing - a real boost leak skews every pressure reading. Tests: Real boost leak skewing the pressure balance
  5. Replace the sensor if its reading does not track the other sensors, then verify under load.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $250
Labor$120 – $300

Turbocharger interstage pressure sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2D23 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Swapping a pressure sensor is easy; telling a bad sensor from a real boost leak takes careful live-data comparison.

Watch this repair on YouTube

Parts & tools

Intake & throttle toolkit — what the job actually takes

Torque specs: Throttle body bolts: typically 8–12 Nm — verify spec.

Pro tip: Some cars need a throttle relearn after cleaning (scan tool or battery-disconnect procedure), or the idle will hunt.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →