P2B46: A Camshaft Position Actuator Position Sensor B Circuit High Bank 2
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonCheck the oil before buying a sensor - oil-driven phasers are the usual root cause.
Your engine moves its A camshaft timing on the fly, and the sensor confirming it moved is giving a bad reading on bank 2. Expect a check engine light and possibly rough running or poor economy. Usually the sensor or its wiring.
Key facts
P2B46 means a Camshaft Position Actuator Position Sensor B Circuit High Bank 2. Your engine moves its A camshaft timing on the fly, and the sensor confirming it moved is giving a bad reading on bank 2. Expect a check engine light and possibly rough running or poor economy. Usually the sensor or its wiring. WrenchFair's published fair-price range for this repair is $60–$300 parts and $100–$300 labor at independent shops.
WrenchFair rates P2B46 a 3-of-5 DIY difficulty (“Oil check first, then sensor testing; sensors are usually accessible on the head.”) with a “Diagnose soon” driveability rating: Check the oil before buying a sensor - oil-driven phasers are the usual root cause. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
rough running
poor fuel economy
possible rattle on startup
Likely causes
Failed position sensor B on the bank 2 A camshaft actuator (most common)
Damaged wiring or oil-contaminated connector
Actual phaser fault making the sensor read implausibly (check oil first)
Low or wrong-spec engine oil affecting phaser movement
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. Tests: Actual phaser fault making the sensor read implausibly (check oil first)
Check the engine oil level and spec - phasers are oil-driven. Tests: Low or wrong-spec engine oil affecting phaser movement
Inspect the bank 2 A sensor wiring and connector for oil contamination. Tests: Damaged wiring or oil-contaminated connector
Watch camshaft actual vs. commanded angle in live data. Tests: Failed position sensor B on the bank 2 A camshaft actuator (most common)
Replace the sensor if it reads wrong with a healthy phaser, clear the code, and confirm the angles track.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $300
Labor$100 – $300
Camshaft position sensor replacement (A bank 2). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2B46 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Oil check first, then sensor testing; sensors are usually accessible on the head.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →