P2455

P2455: Diesel Particulate Filter Pressure Sensor a Circuit High

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Diesel-only: the particulate filter pressure sensor A signal is too high - the DPF may be overfull or its sensor hoses are clogged.

Model notes: Reported on Ford Focus ST diesel, 2008 Ford Focus 1.6 TDCi, 2007 Mini Cooper D; diesel vehicles from Ford, Dodge, GMC, Chevrolet, Mercedes, VW.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check for TSBs matching the code, vehicle, and symptoms - a known fix can shortcut the diagnosis.
  2. Check DPF regeneration fluid (diesel exhaust fluid) before attempting to diagnose this code. Tests: Diesel exhaust fluid reservoir empty
  3. Visually inspect related harnesses and connectors, especially wiring routed near hot exhaust components and sharp edges; check battery, terminals, and alternator output. Tests: Diesel exhaust fluid reservoir empty
  4. Record all stored codes and freeze-frame data, then clear codes and test drive.
  5. Test the DPF pressure sensor with the DVOM per the service manual; replace if it fails resistance specifications.
  6. Check the DPF pressure sensor supply hoses for clogs, burns, cracks, or collapse; replace hoses as required (high-temp silicon; reroute if melted or cut).
  7. If sensor and hoses are good, test system circuits - disconnect all related controllers before testing resistance/continuity to prevent PCM damage; repair or replace open or shorted circuits.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$100 – $500
Labor$100 – $350

DPF pressure sensor replacement or DPF service/regeneration. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2455 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Checking DPF regeneration fluid, visual harness inspection, and freeze-frame/code recording are DIY-friendly; sensor and circuit testing per specs is intermediate.

Watch this repair on YouTube

Parts & tools

EGR toolkit — what the job actually takes

Torque specs: Typically 20–30 Nm into iron, less into aluminum — verify spec.

Pro tip: Clean the passages, not just the valve — a new valve on clogged passages throws the same code.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →