P2436

P2436: Secondary Air Injection System Air Flow/pressure Sensor Circuit Range/performance Bank 2

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The secondary air injection system (cold-start emissions pump) pressure sensor circuit on bank 2 is reading out of range or performing poorly.

Model notes: Reported on Buick, Chevrolet, Cadillac, Lexus, Toyota, BMW, Subaru, and others.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research TSBs for the specific vehicle by year, model, and powertrain - a known fix can shortcut the diagnosis.
  2. Perform a thorough visual inspection of the associated wiring for scraping, rubbing, bare wires, or burn spots.
  3. Check all connectors and connections for security, corrosion, and damaged pins, including all PCM connections; verify circuit configuration (fuses or fusible links included) with tech data. Tests: Corroded, damaged or loose connector
  4. Test the one-way check valve to ensure airflow is in one direction only - ice in the pump during extreme cold indicates a defective check valve letting exhaust condensation into the pump. Tests: Defective secondary air injection pump
  5. Do not replace the pump before ruling out the check valve and wiring - that is the common mistake.
  6. Advanced: with power removed, continuity-test wiring and connectors (expect 0 ohms); then perform voltage checks per vehicle-specific troubleshooting charts.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $600
Labor$100 – $350

Secondary air injection pump, check valve, or pressure sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2436 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Visual wiring inspection, check-valve airflow test, and TSB lookup are DIY-friendly; advanced voltage/continuity testing needs a multimeter and vehicle-specific data.

Watch this repair on YouTube

Parts & tools

EGR toolkit — what the job actually takes

Torque specs: Typically 20–30 Nm into iron, less into aluminum — verify spec.

Pro tip: Clean the passages, not just the valve — a new valve on clogged passages throws the same code.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →