P2260

P2260: secondary air injection system control B circuit high

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The secondary air injection control circuit B (the system that pumps fresh air into the exhaust on cold starts) has too much voltage.

Model notes: Common on Mazda, BMW, Ford, Dodge, Saab, Range Rover, Jaguar.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Search for technical service bulletins matching the code, vehicle, and symptoms first.
  2. Retrieve all stored codes and freeze frame data; clear the codes and test drive.
  3. Perform a visual inspection of related wiring and connectors - repair or replace damaged wiring.
  4. Use the DVOM to test secondary air injection system control voltage at the appropriate connector pin. Tests: Open or shorted control circuits
  5. If no voltage is detected, check system fuses and replace blown fuses.
  6. If voltage is detected, test the corresponding circuit at the PCM connector - no voltage there means an open between the component and PCM; voltage there points to a defective PCM or programming error.
  7. Vehicles in extremely cold climates often experience secondary air injection pump failure from frozen condensation.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$100 – $350
Labor$100 – $250

Secondary air injection pump or valve replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2260 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Visual inspection, fuse replacement, and pump/valve replacement are intermediate work; circuit tracing requires electrical familiarity.

Watch this repair on YouTube

Parts & tools

EGR toolkit — what the job actually takes

Torque specs: Typically 20–30 Nm into iron, less into aluminum — verify spec.

Pro tip: Clean the passages, not just the valve — a new valve on clogged passages throws the same code.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →