P2137

P2137: Throttle pedal position sensor switch B C voltage correlation

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The throttle sensors B and C disagree with each other - your car's computer cannot confirm the actual throttle position.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 8 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check for technical service bulletins for your vehicle relating to this code.
  2. Check for a manufacturer throttle relearn procedure and perform it if applicable. Tests: Throttle relearn not performed after a repair
  3. Pull the electrical connector off the throttle body - inspect for missing, bent, or corroded female terminals. Tests: Poor connection in the throttle body wiring connector (corroded or pulled-out pigtail…
  4. Clean any corrosion, apply dielectric grease, and reconnect.
  5. If terminals are bent or missing, replace the pigtail connector.
  6. Inspect the top cover of the throttle body for cracks or warping - replace the throttle body if distorted.
  7. Probe the accelerator pedal sensor - signal voltage should rise smoothly as the pedal is depressed.
  8. Address any additional throttle codes first.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$20 – $500
Labor$100 – $400

Pigtail connector repair, accelerator pedal sensor replacement, or throttle body replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2137 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Inspecting and cleaning the throttle body connector is DIY-friendly; throttle body replacement is moderate work on many vehicles.

Watch this repair on YouTube

Parts & tools

Intake & throttle toolkit — what the job actually takes

Torque specs: Throttle body bolts: typically 8–12 Nm — verify spec.

Pro tip: Some cars need a throttle relearn after cleaning (scan tool or battery-disconnect procedure), or the idle will hunt.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →