P2106

P2106: Throttle actuator control system - forced limited power

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car has put itself in 'limp mode' - deliberately low power - because it detected a throttle problem and doesn't fully trust the gas pedal right now. There's always another code alongside this one that names the real culprit.

VW/Audi note (VCDS): Always diagnose the lowest-numbered or accompanying throttle code first; P2106 is the symptom, not the disease.
Model notes: Forced-limited-power is the ECM protecting you from a throttle it cannot trust - it is doing its job. The fix is always in the underlying throttle fault.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read all codes - the accompanying throttle, TPS, or pedal code is the real diagnosis Tests: Any throttle body, TPS, or APP sensor fault triggering the protection strategy (fix the…
  2. Address that fault first (often throttle body cleaning) Tests: Any throttle body, TPS, or APP sensor fault triggering the protection strategy (fix the…
  3. Clear codes and road test to confirm limited-power mode does not return
  4. If it returns with no other codes, suspect an intermittent throttle system fault and log data during the event Tests: Any throttle body, TPS, or APP sensor fault triggering the protection strategy (fix the…

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$10 – $250
Labor$80 – $250

Cleaning is nearly free; throttle body replacement costs more. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2106 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Do not chase this code alone - diagnose the accompanying throttle code and this one usually clears with it.

Watch this repair on YouTube

Parts & tools

Intake & throttle toolkit — what the job actually takes

Torque specs: Throttle body bolts: typically 8–12 Nm — verify spec.

Pro tip: Some cars need a throttle relearn after cleaning (scan tool or battery-disconnect procedure), or the idle will hunt.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →