P202D

P202D: Reductant Leakage

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your diesel exhaust fluid (DEF) system has a leak.

Model notes: Diesel vehicles only (Ford, Mercedes-Benz, Dodge, Chevrolet). Frequently attributed to supply pumps leaking internally.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Activate the pump to create pressure and inspect the system for external leaks; check the supply pump and injector for leakage. Repair any leaks before continuing. Tests: Internal reductant supply pump leak
  2. Retrieve stored codes and freeze frame data, record them, clear the codes, and test-drive until the PCM enters readiness mode or the code resets.
  3. Use the DVOM to test reductant system pressure sensors against manufacturer specifications; components outside maximum allowable parameters are defective. Tests: Bad reductant tank pressure sensor
  4. Test reductant supply pump voltage (usually battery voltage) with the pump activated; if conditions do not permit activation, manually activate the pump with the scan tool. Tests: Internal reductant supply pump leak
  5. If the pump is functional, test input and output signal circuits from the fuse panel, PCM, and ignition switch with the DVOM, disconnecting all controllers first.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $600
Labor$100 – $400

Reductant supply pump or DEF line replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P202D ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Leak inspection and pressure checks are intermediate; DEF pump access varies.

Watch this repair on YouTube

Parts & tools

EGR toolkit — what the job actually takes

Torque specs: Typically 20–30 Nm into iron, less into aluminum — verify spec.

Pro tip: Clean the passages, not just the valve — a new valve on clogged passages throws the same code.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →