Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car will usually limit power or refuse ready mode until the pack checks out - plan on a tow if it will not start.
The car has flagged the hybrid/ev battery pack deterioration as not working right. Expect a warning light with reduced power, or the car may refuse to go into ready mode at all.
Key facts
P0EDE means hybrid/EV Battery Pack C Deterioration. The car has flagged the hybrid/ev battery pack deterioration as not working right. Expect a warning light with reduced power, or the car may refuse to go into ready mode at all. WrenchFair's published fair-price range for this repair is $1720–$13800 parts and $200–$3000 labor at independent shops.
WrenchFair rates P0EDE a 4-of-5 DIY difficulty (“High-voltage system: lethal voltage in the pack and orange cables - pack and inverter internals are qualified-technician-only work, and DIY is limited to visual checks, fuses, and 12V-side testing.”) with a “Diagnose soon” driveability rating: The car will usually limit power or refuse ready mode until the pack checks out - plan on a tow if it will not start. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
ev/hybrid system warning light on
reduced power output or limp mode
charging may fail or be slowed
reduced electric range
Likely causes
cells aged - capacity reduced (most common)
internal resistance increased
pack cell imbalance approaching service threshold
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. HIGH-VOLTAGE SAFETY FIRST: this code touches the traction-battery high-voltage system. Lethal voltage lives in the pack and the orange cables - pack internals are qualified-technician-only work. DIY is limited to visual inspection, fuses, and 12V-side checks with the system depowered. Tests: internal resistance increased
2. Clear the code and confirm it returns under the same conditions before replacing anything.
3. Inspect the hybrid/ev battery pack c deterioration connector and wiring for damage, corrosion, or loose pins.
4. Check live data on a scan tool and compare against expected values in the service manual.
5. Rule out wiring and connector faults before replacing the hybrid/ev battery pack c deterioration; suspect the control module only after the circuit tests good.
Typical price range
Parts$1720 – $13800
Labor$200 – $3000
Three tiers, very different prices: refurbished hybrid pack $1,000-$2,500; new OEM hybrid pack $2,000-$4,000; full EV packs $5,000-$16,000+ depending on model (Leaf/Bolt at the low end, Tesla and trucks higher). Labor is the swap itself - 2-4 hrs on a hybrid ($200-$600), 8-20 hrs on an EV at dealer rates ($1,000-$3,000). The ranges above show parts vs. install labor separately. Actual quotes vary by vehicle, region, and shop - get a local written estimate. Corrected 2026-10-04 against real-world price evidence (prior labor range mistakenly folded pack price into labor).
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0EDE ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — High-voltage system: lethal voltage in the pack and orange cables - pack and inverter internals are qualified-technician-only work, and DIY is limited to visual checks, fuses, and 12V-side testing.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →