Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car may refuse to enter ready mode or shut down without warning — plan on a tow rather than forcing a drive.
Every high-voltage connector in the car is part of a safety loop: open any connector and the loop breaks, cutting the high voltage. This code means that safety loop looks broken to the computer, which usually means a connector isn't fully seated or a cable is damaged. The loop exists because the voltage involved can kill, so have a trained technician confirm it before forcing anything.
Key facts
P0B37 means high voltage service disconnect open. Every high-voltage connector in the car is part of a safety loop: open any connector and the loop breaks, cutting the high voltage. This code means that safety loop looks broken to the computer, which usually means a connector isn't fully seated or a cable is damaged. The loop exists because the voltage involved can kill, so have a trained technician confirm it before forcing anything. WrenchFair's published fair-price range for this repair is $50–$300 parts and $75–$450 labor at independent shops.
WrenchFair rates P0B37 a 3-of-5 DIY difficulty (“Middle of the road: visual checks, connectors, fuses, and 12V tests are DIY-friendly, but anything on the high-voltage side belongs to a technician.”) with a “Diagnose soon” driveability rating: The car may refuse to enter ready mode or shut down without warning — plan on a tow rather than forcing a drive. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
vehicle won't enter ready mode
hybrid system warning light on
no-start after recent service work
Likely causes
service disconnect switch in service position
open in disconnect wire
service plug or interlock connector not fully seated
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Park, power down completely, and respect the high-voltage system: the battery pack and orange cables are lethal to touch. Leave anything inside the pack to a trained technician; you can safely check the 12V battery, fuses, and connectors outside the pack. Tests: service plug or interlock connector not fully seated
Check that the service plug and any interlock connectors you can see are fully seated — look, don't force, and never remove the service plug while the car is powered. Tests: service plug or interlock connector not fully seated
Inspect visible orange-cable connectors for damage or unlatched locking tabs. Do not disconnect them. Tests: service disconnect switch in service position
Think about recent work: a connector left unlatched after service is the classic cause. Tests: service plug or interlock connector not fully seated
If everything looks seated, the break is inside a connector or cable — technician diagnosis from here.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $300
Labor$75 – $450
service disconnect switch in service position. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0B37 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Middle of the road: visual checks, connectors, fuses, and 12V tests are DIY-friendly, but anything on the high-voltage side belongs to a technician.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →