P0B0D: Electric/auxiliary transmission fluid pump motor control module
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonExpect reduced power or limp mode — the hybrid system protects itself by limiting the electric side. Drive gently to a shop and skip long trips.
This small electric pump moves transmission fluid around; on hybrids it keeps the transaxle lubricated and cool. This code means the computer saw an electrical problem in the wiring in the pump's motor. It's a low-voltage part, but it lives near high-voltage hardware, so keep your hands and tools clear of any orange cables.
Key facts
P0B0D means electric/auxiliary transmission fluid pump motor control module. This small electric pump moves transmission fluid around; on hybrids it keeps the transaxle lubricated and cool. This code means the computer saw an electrical problem in the wiring in the pump's motor. It's a low-voltage part, but it lives near high-voltage hardware, so keep your hands and tools clear of any orange cables. WrenchFair's published fair-price range for this repair is $125–$1500 parts and $300–$1200 labor at independent shops.
WrenchFair rates P0B0D a 4-of-5 DIY difficulty (“Mostly a shop job: you can check the 12V battery, fuses, and accessible connectors, but high-voltage diagnosis is technician-only.”) with a “Diagnose soon” driveability rating: Expect reduced power or limp mode — the hybrid system protects itself by limiting the electric side. Drive gently to a shop and skip long trips. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine or transmission warning light on
harsh, delayed, or missing shifts
possible limp mode (locked in one gear)
slipping or shuddering during gear changes
Likely causes
internal module fault
communication lost
failed auxiliary pump motor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Park, power down completely, and respect the high-voltage system: the battery pack and orange cables are lethal to touch. Leave anything inside the pack to a trained technician; you can safely check the 12V battery, fuses, and connectors outside the pack.
Check the transmission fluid level and condition per the owner's manual.
With the car powered on, listen for the pump running.
Check the pump's fuse and electrical connector.
Pump replacement is usually straightforward but often buried — get a quote if access looks bad.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$125 – $1500
Labor$300 – $1200
internal module fault. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0B0D ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Mostly a shop job: you can check the 12V battery, fuses, and accessible connectors, but high-voltage diagnosis is technician-only.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →