Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonAn actuator stuck on cooks the clutch fast - diagnose it before the clutch is ruined.
The wire running your clutch actuator is stuck high. The actuator may stay engaged and overheat - the clutch will not behave normally.
Key facts
P0903 means clutch actuator circuit high. The wire running your clutch actuator is stuck high. The actuator may stay engaged and overheat - the clutch will not behave normally. WrenchFair's published fair-price range for this repair is $200–$1500 parts and $400–$1200 labor at independent shops.
WrenchFair rates P0903 a 3-of-5 DIY difficulty (“Trace the short with a meter and wiring diagram before replacing parts.”) with a “Diagnose soon” driveability rating: An actuator stuck on cooks the clutch fast - diagnose it before the clutch is ruined. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
clutch dragging or overheating
shifting trouble
transmission warning light on
possible burning smell from the clutch
Likely causes
Actuator control wire shorted to battery voltage (most common)
Shorted clutch A actuator internally
Damaged connector with pins bridged to a power wire
Failed PCM/TCM output driver (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all codes and check clutch actuator live data for abnormal position. Tests: Shorted clutch A actuator internally
Inspect the harness for chafing where the control wire could touch a 12V feed. Tests: Actuator control wire shorted to battery voltage (most common)
Check the actuator and connectors for damage and bridged pins. Tests: Damaged connector with pins bridged to a power wire
Test the circuit for a short to power with the meter.
Repair the wiring or replace the actuator as the testing indicates.
After repair, run the clutch relearn/adaptation procedure.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$200 – $1500
Labor$400 – $1200
Clutch actuator circuit short repair (actuator replacement if failed). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0903 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Trace the short with a meter and wiring diagram before replacing parts.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →