P0712/P0713: Transmission fluid temperature sensor circuit low input
DIY difficulty 3/5
Diagnose soonA bad sensor reading can cause poor running or stalling. Drive carefully and diagnose soon.
TFT sensor reading out of range. The TCU needs fluid temp for shift strategy and protection.
Key facts
P0712/P0713 means transmission fluid temperature sensor circuit low input. TFT sensor reading out of range. The TCU needs fluid temp for shift strategy and protection. WrenchFair's published fair-price range for this repair is $30–$120 parts and $80–$200 labor at independent shops.
WrenchFair rates P0712/P0713 a 3-of-5 DIY difficulty (“Often requires pan removal.”) with a “Diagnose soon” driveability rating: A bad sensor reading can cause poor running or stalling. Drive carefully and diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
harsh cold shifts
limp mode
no lockup
Likely causes
Failed temp sensor (often in the valve body harness)
Wiring fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 1 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Compare the reading to ambient on a cold soak
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $120
Labor$80 – $200
Sensor replacement is the typical fix. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →