P06D0

P06D0: Cylinder 12 Glow Plug Incorrect

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car's computer checked cylinder 12's glow plug and says it is the wrong one - its electrical signature does not match. Usually someone installed the wrong plug, or the plug degraded. Tip: on some VWs, cranking while the glow plug light is still on sets false codes - wait for the light to go out before starting.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 3 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Confirm the installed plug matches the factory part number. Tests: wrong glow plug installed in cylinder 12
  2. Wait for the glow plug light to go out before cranking, then retest. Tests: false code from cranking during the glow phase (some VW)
  3. Replace cylinder 12's plug with the correct one if the code returns. Tests: wrong glow plug installed in cylinder 12

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$15 – $60
Labor$75 – $250

Correct glow plug replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P06D0 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Verify the correct part number; replace with the right plug.

Watch this repair on YouTube

Parts & tools

Diesel glow plug toolkit — what the job actually takes

Torque specs: Typically 12–20 Nm — verify spec. A snapped glow plug can mean cylinder-head removal.

Pro tip: Test each plug with a multimeter first and replace only the dead ones.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →