Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA charging fault will strand you when the battery dies - diagnose soon.
The wire controlling your alternator's output is stuck high - it may be overcharging, which cooks the battery. Check the wiring to the alternator, then the alternator.
Key facts
P0626 means generator Field/F Terminal Circuit High. The wire controlling your alternator's output is stuck high - it may be overcharging, which cooks the battery. Check the wiring to the alternator, then the alternator. WrenchFair's published fair-price range for this repair is $20–$500 parts and $75–$300 labor at independent shops.
WrenchFair rates P0626 a 2-of-5 DIY difficulty (“Charging system testing with a multimeter; check wiring first.”) with a “Diagnose soon” driveability rating: A charging fault will strand you when the battery dies - diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
battery warning light on or not working
battery going dead
check engine light on
Likely causes
short to voltage or open in the field wiring
failed alternator 3 owner notes link this repair to P0626
damaged connector
Owner notes linked to P0626: 3 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Measure battery voltage engine off and running - running voltage should be higher and steady. Tests: short to voltage or open in the field wiring
Inspect the wiring between the computer and the alternator. Tests: failed alternator
Have the alternator and battery load-tested. Tests: failed alternator
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $500
Labor$75 – $300
Alternator replacement or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0626 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Charging system testing with a multimeter; check wiring first.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →