Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonSteering works, but stalling while parking is a nuisance - fix soon.
A sensor tells your car's computer how hard the power steering is working so it can raise the idle when you turn the wheel. Its signal is wrong. Steering still works - but the engine may stumble or stall when parking.
Key facts
P0552 means power Steering Pressure Sensor Circuit Low. A sensor tells your car's computer how hard the power steering is working so it can raise the idle when you turn the wheel. Its signal is wrong. Steering still works - but the engine may stumble or stall when parking. WrenchFair's published fair-price range for this repair is $40–$150 parts and $75–$200 labor at independent shops.
WrenchFair rates P0552 a 2-of-5 DIY difficulty (“Check the fluid level first; the sensor is on the high-pressure line.”) with a “Diagnose soon” driveability rating: Steering works, but stalling while parking is a nuisance - fix soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
engine stumbles or stalls when turning at low speed
check engine light on
idle dips when parking
Likely causes
failed power steering pressure sensor
wiring fault
corroded connector
low power steering fluid
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the power steering fluid level and top up with the correct fluid. Tests: low power steering fluid
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Watch the pressure signal with live data while turning the wheel. Tests: failed power steering pressure sensor
Test the sensor circuit; replace the sensor if the signal is wrong.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$75 – $200
Power steering pressure sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0552 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Check the fluid level first; the sensor is on the high-pressure line.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →