Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable; the car will fail emissions and cold-start pollution is higher until fixed.
Your car has a special catalyst with a heater to get it working faster on cold mornings. The computer says side 2 is not heating up and cleaning the exhaust the way it should. Usually the heater element or the converter itself is worn out.
Key facts
P0433 means heated Catalyst Efficiency Below Threshold (Bank 2). Your car has a special catalyst with a heater to get it working faster on cold mornings. The computer says side 2 is not heating up and cleaning the exhaust the way it should. Usually the heater element or the converter itself is worn out. WrenchFair's published fair-price range for this repair is $300–$2000 parts and $150–$400 labor at independent shops.
WrenchFair rates P0433 a 3-of-5 DIY difficulty (“Diagnosis needs live data; replacement is bolt-on but parts are pricey and sometimes dealer-only.”) with a “Diagnose soon” driveability rating: Drivable; the car will fail emissions and cold-start pollution is higher until fixed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
failed emissions test
longer cold-start warm-up smell
Likely causes
failed heated catalyst element (bank 2)
degraded catalyst substrate
heater control circuit fault
exhaust leak affecting warm-up readings
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Watch the catalyst warm-up with live data on a cold start - compare bank 1 and bank 2 heater behavior. Tests: failed heated catalyst element (bank 2)
Check the heater element circuit for opens or shorts with a multimeter. Tests: heater control circuit fault
Inspect for exhaust leaks that could skew the efficiency test. Tests: exhaust leak affecting warm-up readings
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$300 – $2000
Labor$150 – $400
Heated catalyst replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0433 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Diagnosis needs live data; replacement is bolt-on but parts are pricey and sometimes dealer-only.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →