P0432

P0432: Main Catalyst Efficiency Below Threshold (Bank 2)

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your catalytic converter is like a filter that burns pollution out of the exhaust. The computer checks it by comparing two oxygen sensors - one before, one after. This code means the 'after' sensor is reading almost the same as the 'before' one, so the converter on side 2 is not cleaning anymore. But first make sure an exhaust leak or a tired oxygen sensor is not fooling the test.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
  2. With a scan tool, graph the bank 2 upstream and downstream oxygen sensors at 2500 rpm - if the downstream mirrors the upstream, the converter is done. Tests: lazy or biased downstream oxygen sensor
  3. Inspect the exhaust for leaks ahead of the converter; even a small leak skews the test. Tests: exhaust leak ahead of or at the converter
  4. Check for oil or coolant consumption - a converter poisoned by either will fail again if the engine issue is not fixed. Tests: engine burning oil or coolant, poisoning the converter
  5. Replace the converter only after the sensors and leaks check out.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$200 – $2500
Labor$150 – $400

Catalytic converter replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0432 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Diagnosis is easy with live data; replacing the converter is bolt-on work but the part is expensive.

Watch this repair on YouTube

Parts & tools

Catalytic converter toolkit — what the job actually takes

Torque specs: Exhaust flange nuts: typically 35–50 Nm — verify spec. O2 sensors: typically 35–50 Nm.

Pro tip: A new cat on an engine that’s burning oil or misfiring will die fast — fix the underlying cause first or you’ll be buying another one.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →