P0139

P0139: O2 sensor circuit slow response, bank 1 sensor 2

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The sensor that monitors your catalytic converter has gotten sluggish with age. The car drives normally, but the computer can't properly verify the converter is healthy.

VW/Audi note (VCDS): Blip the throttle to 3000 RPM and release - the downstream sensor should dip and recover promptly; a delayed trace condemns it.
Model notes: Downstream sensors live an easier life than upstream ones but still wear out. If the vehicle burns oil, expect shorter O2 sensor life across all positions.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Snap the throttle and watch the downstream sensor in live data - it should react within a second or two; a long delay means lazy Tests: Aged downstream O2 sensor (most common)
  2. Check for exhaust leaks and oil burning that could be fouling the sensor Tests: Minor exhaust leak slowing the sensor's response to mixture changes
  3. Verify the heater circuit is working - a cold sensor is a slow sensor Tests: Weak sensor heater
  4. Replace the sensor if it is old and slow; there is no reliable cleaning method

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $130
Labor$75 – $180

O2 sensor replacement is the typical fix. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0139 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Simple replacement; downstream sensors are the easiest O2 sensors to access.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: O2 sensors: typically 35–50 Nm (26–37 lb-ft) — verify spec. A dab of nickel anti-seize on the threads; keep it off the sensor tip.

Pro tip: Route the new sensor’s harness exactly like the old one — melted wires on the exhaust are the number-one comeback.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →