Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeJust check that tire's pressure with a gauge regularly until the sensor is replaced.
Your tire-pressure warning light comes on. One of the wheel sensors has a dead battery, so the car can't watch that tire's pressure — check it manually with a gauge.
Key facts
C0902 means tPMS Sensor 2 Battery. Your tire-pressure warning light comes on. One of the wheel sensors has a dead battery, so the car can't watch that tire's pressure — check it manually with a gauge. WrenchFair's published fair-price range for this repair is $40–$100 parts and $25–$75 labor at independent shops.
WrenchFair rates C0902 a 2-of-5 DIY difficulty (“The sensor swap needs the tire broken down — the relearn is the easy part.”) with a “Drive safe” driveability rating: Just check that tire's pressure with a gauge regularly until the sensor is replaced. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
tpms warning light on
tire pressure display shows dashes
low tire pressure warning may not work for that wheel
Likely causes
sensor battery reached end of life (typically 7-10 years)
sensor electronics failed
valve stem corroded and leaking
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Confirm which sensor is dead with a TPMS scan tool.
2. Check the tire's pressure manually in the meantime.
3. Have the sensor replaced (tire must come off the wheel).
4. Relearn the new sensor ID to the car and verify readings.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $100
Labor$25 – $75
TPMS sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0902 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — The sensor swap needs the tire broken down — the relearn is the easy part.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →