Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonHandling is compromised — drive gently, avoid aggressive cornering, and fix it soon.
A suspension warning comes on and the car may sit unevenly or ride oddly. The sensor that tells the car how high the right rear corner is has failed.
Key facts
C0823 means air Suspension Height Sensor Rear Right. A suspension warning comes on and the car may sit unevenly or ride oddly. The sensor that tells the car how high the right rear corner is has failed. WrenchFair's published fair-price range for this repair is $80–$250 parts and $100–$250 labor at independent shops.
WrenchFair rates C0823 a 2-of-5 DIY difficulty (“Often just a popped-off linkage — a five-minute fix when you're lucky.”) with a “Diagnose soon” driveability rating: Handling is compromised — drive gently, avoid aggressive cornering, and fix it soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
suspension warning light on
vehicle sits unevenly
ride height wrong on one corner
Likely causes
sensor linkage broken or disconnected
sensor failed
connector corroded
wiring damaged
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Look at the right rear sensor — its little linkage arm is often just popped off or snapped. Tests: sensor linkage broken or disconnected
2. Check the sensor connector for corrosion. Tests: connector corroded
3. Compare the right rear sensor's live reading against the other corners.
4. Replace the sensor if the linkage is good but the reading is wrong, then calibrate ride height. Tests: sensor linkage broken or disconnected
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $250
Labor$100 – $250
Ride height sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0823 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Often just a popped-off linkage — a five-minute fix when you're lucky.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →