Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYou can still steer, but it takes serious effort — keep both hands on the wheel and avoid tight maneuvers.
A power steering warning comes on. The steering assist feels wrong — too heavy, too light, or cutting in and out.
Key facts
C0740 means electric Power Steering Voltage Supply. A power steering warning comes on. The steering assist feels wrong — too heavy, too light, or cutting in and out. WrenchFair's published fair-price range for this repair is $0–$250 parts and $50–$150 labor at independent shops.
WrenchFair rates C0740 a 2-of-5 DIY difficulty (“Start at the battery — EPS is the first to complain about bad voltage.”) with a “Diagnose soon” driveability rating: You can still steer, but it takes serious effort — keep both hands on the wheel and avoid tight maneuvers. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
power steering warning light on
assist cuts out intermittently
battery light may also be on
Likely causes
weak battery or bad charging
corroded power feed
blown high-current fuse
module sensing fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. 1. Measure battery voltage engine-off and running. Tests: weak battery or bad charging
2. 2. Check the EPS high-current fuse and power feed for voltage drop. Tests: blown high-current fuse
3. 3. Clean terminals and grounds.
4. 4. Only suspect the module if the supply is proven good.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $250
Labor$50 – $150
Battery, fuse, or power feed repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0740 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Start at the battery — EPS is the first to complain about bad voltage.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →