C0735: Electric Power Steering Module Internal Fault
DIY difficulty 5/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYou can still steer, but it takes serious effort — keep both hands on the wheel and avoid tight maneuvers.
A power steering warning comes on. The wheel gets very heavy, like an old car with no power steering.
Key facts
C0735 means electric Power Steering Module Internal Fault. A power steering warning comes on. The wheel gets very heavy, like an old car with no power steering. WrenchFair's published fair-price range for this repair is $300–$1000 parts and $150–$400 labor at independent shops.
WrenchFair rates C0735 a 5-of-5 DIY difficulty (“Module replacement plus programming — rule out power and wiring first.”) with a “Diagnose soon” driveability rating: You can still steer, but it takes serious effort — keep both hands on the wheel and avoid tight maneuvers. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
power steering warning light on
no power assist
steering very heavy at low speed
Likely causes
module internal electronics failed
water intrusion
voltage spike
software corruption
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. 1. Verify clean power and ground to the module.
2. 2. Check for water intrusion at the connector. Tests: water intrusion
3. 3. Check for software updates. Tests: software corruption
4. 4. Replace and program the module if the self-test still fails.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$300 – $1000
Labor$150 – $400
EPS module replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0735 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
5 of 5 — Module replacement plus programming — rule out power and wiring first.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →