C0720: Electric Power Steering Torque Sensor Circuit
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYou can still steer, but it takes serious effort — keep both hands on the wheel and avoid tight maneuvers.
A power steering warning comes on. The steering assist feels wrong — too heavy, too light, or cutting in and out.
Key facts
C0720 means electric Power Steering Torque Sensor Circuit. A power steering warning comes on. The steering assist feels wrong — too heavy, too light, or cutting in and out. WrenchFair's published fair-price range for this repair is $300–$1200 parts and $200–$500 labor at independent shops.
WrenchFair rates C0720 a 4-of-5 DIY difficulty (“The sensor is inside the column — replacement often means the whole column.”) with a “Diagnose soon” driveability rating: You can still steer, but it takes serious effort — keep both hands on the wheel and avoid tight maneuvers. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
power steering warning light on
no power assist or inconsistent assist
steering effort changes unexpectedly
Likely causes
torque sensor failed
clock spring or wiring fault
connector corrosion
column damaged
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. 1. Watch torque sensor live data while turning the wheel — it should respond smoothly to effort. Tests: torque sensor failed
2. 2. Check the wiring between the sensor and the EPS module.
3. 3. If the wiring is good, the sensor has failed — usually replaced with the column assembly. Tests: torque sensor failed
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$300 – $1200
Labor$200 – $500
Steering column replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0720 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — The sensor is inside the column — replacement often means the whole column.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →