Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeJust the parking aids — the car drives normally.
Your parking sensors stay silent and any park-assist display shows unavailable. Everything else drives normally.
Key facts
C0620 means park Assist Module Communication. Your parking sensors stay silent and any park-assist display shows unavailable. Everything else drives normally. WrenchFair's published fair-price range for this repair is $150–$600 parts and $100–$250 labor at independent shops.
WrenchFair rates C0620 a 2-of-5 DIY difficulty (“Check the fuse and the module's power first — modules are the last suspect.”) with a “Drive safe” driveability rating: Just the parking aids — the car drives normally. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
parking sensors not working
park assist unavailable message
no warning beeps when reversing
Likely causes
park assist module failed
blown fuse to the module
wiring or connector fault
module lost power or ground
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the park assist fuse. Tests: park assist module failed
2. Verify the module has power and ground at its connector. Tests: module lost power or ground
3. Inspect the connector for corrosion or water. Tests: wiring or connector fault
4. If power is good and it still won't talk, the module has failed. Tests: park assist module failed
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$150 – $600
Labor$100 – $250
Park assist module replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0620 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Check the fuse and the module's power first — modules are the last suspect.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →