C05D7: Brake Transmission Shift Interlock (BTSI) Control Circuit
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIf you're stuck in Park, use the manual shift-lock override (owner's manual) to get moving, then fix it.
You may not be able to shift out of Park, or the shifter moves without the brake pressed. The interlock isn't working as designed.
Key facts
C05D7 means brake Transmission Shift Interlock (BTSI) Control Circuit. You may not be able to shift out of Park, or the shifter moves without the brake pressed. The interlock isn't working as designed. WrenchFair's published fair-price range for this repair is $20–$150 parts and $80–$200 labor at independent shops.
WrenchFair rates C05D7 a 2-of-5 DIY difficulty (“The solenoid is in the shifter assembly — check the fuse and brake-light switch first, they're the common culprits.”) with a “Diagnose soon” driveability rating: If you're stuck in Park, use the manual shift-lock override (owner's manual) to get moving, then fix it. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
cant shift out of park
shifter moves without brake pressed
brake lights may also be out
Likely causes
BTSI solenoid failed
wiring fault to the shifter
blown fuse
brake pedal switch signal missing
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the brake lights — if they're out too, suspect the brake switch or its fuse. Tests: brake pedal switch signal missing
2. Check the BTSI fuse.
3. Access the shifter and test the interlock solenoid directly. Tests: BTSI solenoid failed
4. Check the wiring between the brake switch, fuse, and solenoid. Tests: brake pedal switch signal missing
5. Replace the solenoid if it won't actuate with good power and signal.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $150
Labor$80 – $200
Shift interlock solenoid or fuse repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C05D7 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — The solenoid is in the shifter assembly — check the fuse and brake-light switch first, they're the common culprits.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →