Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBraking takes more effort while overheated — let it cool and get it diagnosed.
A brake warning comes on and assist may cut back until things cool down. The pedal gets harder while the booster protects itself.
Key facts
C05C2 means brake Booster Motor A Over Temperature. A brake warning comes on and assist may cut back until things cool down. The pedal gets harder while the booster protects itself. WrenchFair's published fair-price range for this repair is $400–$1200 parts and $250–$550 labor at independent shops.
WrenchFair rates C05C2 a 4-of-5 DIY difficulty (“Find out why it overheated before replacing parts — a restriction elsewhere will cook the new booster too.”) with a “Diagnose soon” driveability rating: Braking takes more effort while overheated — let it cool and get it diagnosed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake assist reduced when hot
brake pedal harder than normal
Likely causes
motor working against a hydraulic restriction
motor windings degrading and running hot
cooling airflow around the booster blocked
temperature sensor reading wrong
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Let it cool, clear the code, and see if it returns in normal driving.
2. Check for hydraulic restrictions or binding the motor is fighting. Tests: motor working against a hydraulic restriction
3. Verify the temperature sensor reads plausibly when cold. Tests: temperature sensor reading wrong
4. If it overheats again with no restriction found, replace the booster assembly. Tests: motor working against a hydraulic restriction
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$400 – $1200
Labor$250 – $550
Electric brake booster replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C05C2 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Find out why it overheated before replacing parts — a restriction elsewhere will cook the new booster too.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →