Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBase braking works, but electronic brake assists are degraded — get it diagnosed soon.
Brake-system warnings come on. The brake computer has found a fault in itself, so its electronic assists back off.
Key facts
C0597 means brake System Control Module A Performance. Brake-system warnings come on. The brake computer has found a fault in itself, so its electronic assists back off. WrenchFair's published fair-price range for this repair is $400–$1500 parts and $150–$400 labor at independent shops.
WrenchFair rates C0597 a 5-of-5 DIY difficulty (“Module replacement plus programming — and only after voltage, wiring, and software are ruled out.”) with a “Diagnose soon” driveability rating: Base braking works, but electronic brake assists are degraded — get it diagnosed soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
electronic brake assists degraded
stability control may be limited
Likely causes
module internal electronics failed
water intrusion into the module
voltage spike damage
software corruption (reflash may help)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Rule out low or high system voltage first. Tests: voltage spike damage
2. Check the module's powers, grounds, and connector for corrosion.
3. Check whether a software update is available. Tests: software corruption (reflash may help)
4. If the self-test still fails, replace and program the module.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$400 – $1500
Labor$150 – $400
Brake system control module replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0597 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
5 of 5 — Module replacement plus programming — and only after voltage, wiring, and software are ruled out.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →