Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIf the pedal is getting hard, assist is really fading — get it checked promptly.
A brake warning light comes on and the pedal may feel harder or inconsistent. The booster isn't getting the control it expects.
Key facts
C0566 means brake Booster Solenoid Circuit/Open. A brake warning light comes on and the pedal may feel harder or inconsistent. The booster isn't getting the control it expects. WrenchFair's published fair-price range for this repair is $60–$250 parts and $100–$250 labor at independent shops.
WrenchFair rates C0566 a 3-of-5 DIY difficulty (“The solenoid is usually on or near the booster — reachable, but verify with a scan-tool output test first.”) with a “Diagnose soon” driveability rating: If the pedal is getting hard, assist is really fading — get it checked promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake pedal feels harder
inconsistent brake assist
Likely causes
wiring broken
connector unplugged or corroded
solenoid coil open
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Command the solenoid with a scan-tool output test and listen/feel for it clicking. Tests: solenoid coil open
2. Check its connector and wiring for damage or corrosion. Tests: connector unplugged or corroded
3. Measure coil resistance against the service spec.
4. Replace the solenoid if it doesn't actuate with good power and ground. Tests: solenoid coil open
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $250
Labor$100 – $250
Brake booster solenoid replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0566 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The solenoid is usually on or near the booster — reachable, but verify with a scan-tool output test first.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →