Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBase braking is unaffected, but ABS and stability assists are down — drive gently, especially in bad weather.
ABS, traction, and stability warnings all come on together. The valves have lost power, so none of the electronic brake assists can work.
Key facts
C053B means aBS Valves Supply Voltage Circuit/Open. ABS, traction, and stability warnings all come on together. The valves have lost power, so none of the electronic brake assists can work. WrenchFair's published fair-price range for this repair is $10–$150 parts and $100–$250 labor at independent shops.
WrenchFair rates C053B a 3-of-5 DIY difficulty (“Usually a fuse or wiring fix; the hard part is tracing the feed.”) with a “Diagnose soon” driveability rating: Base braking is unaffected, but ABS and stability assists are down — drive gently, especially in bad weather. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
abs warning light on
traction control light on
stability control disabled message
Likely causes
blown fuse
wiring broken
corroded power feed connector
faulty valve relay
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the ABS valve fuse first.
2. Measure supply voltage at the hydraulic unit connector. Tests: corroded power feed connector
3. Trace the supply wiring for breaks or corrosion.
4. Repair the feed and confirm valve operation with a scan-tool output test.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$10 – $150
Labor$100 – $250
ABS valve supply wiring or fuse repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C053B ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Usually a fuse or wiring fix; the hard part is tracing the feed.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →