Federal rules (49 CFR 396.13) require you to be satisfied your vehicle is in safe operating condition before you drive it — and the pre-trip inspection is how you prove it, to yourself and to an examiner. The trick is doing it in the same order every time, so nothing gets skipped. Walk it the same way on test day and on the job.
Engine compartment
Oil level, coolant level, power steering fluid — check levels and look for leaks under the engine.
Belts: no cracks, frays, or excessive looseness. Hoses: no bulges, cuts, or leaks.
Battery: secure, connections tight, no corrosion. Wiring: no bare or damaged insulation.
In-cab check and engine start
Oil pressure gauge rises to normal; temperature gauge climbs; ammeter/voltmeter shows charging.
Warning lights and buzzers work, then go out. Windshield and mirrors clean, unbroken, adjusted.
Horn (city and air), windshield wipers and washers, heater and defroster all work.
Steering: no more than about 10 degrees of free play on a 20-inch wheel before the wheels move.
Clutch and brake pedals feel right; gearshift works; parking brake holds; service brake stops you.
Seat belt latches and adjusts. Fire extinguisher charged and mounted; warning triangles and spare fuses present.
Brakes, wheels, and suspension
Brake chambers and hoses: no cracks, cuts, or leaks; not rubbing. Slack adjusters move freely with the pushrod.
Drums/discs: no cracks or missing pieces. Brake linings have visible thickness.
Tires: proper inflation, no cuts exposing cord, no bulges; tread depth meets 49 CFR 393.75.
Wheels and rims: no cracks, no missing or loose lug nuts; no rust trails that suggest looseness.
Springs, hangers, shocks, and air bags: not cracked, broken, or leaking. Frame: no cracks or bends.
Sides and rear of the vehicle
Doors, mirrors, and body panels secure. Fuel tank mounted tight, cap on, no leaks.
Drive shaft: not bent or cracked, couplings secure. Exhaust: mounted, no leaks under the cab.
All required lights and reflectors present, clean, unbroken, and working (49 CFR 393.9).
Mud flaps in place. Cargo or trailer doors latched.
Trailer (combination vehicles)
Air and electrical lines connected, not tangled or dragging; glad hands locked and sealed.
Landing gear fully raised with the crank handle secured. Trailer brakes: check operation.
Fifth wheel: jaws locked around the kingpin shank, no gap; slide lock pins engaged if applicable.
Trailer lights, reflectors, and mud flaps all good; rear doors latched and sealed if loaded.
Talk it like the examiner wants
On test day, point at or touch each part, name it, and say what you're checking for — "the oil level is full, no leaks" beats a silent stare. Examiners score what they hear you verify, not what you glance at.
Practice this hands-on
🐖 Rig Pig — free pre-trip app for drivers
Study guides, DMV practice tests, and AI photo checks that flag visible issues and what an officer may inspect at roadside. Built by a working CDL driver. Free, no download — open it in your browser and add it to your home screen.