2008–2013 Toyota Highlander

Community-sourced DIY repair guides for the 2008–2013 Toyota Highlander, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Intermediate steering shaft clunk Owner-verified (2.7L I4, 3.5L V6 (2GR-FE))

The lower intermediate shaft sits in the driver footwell between the gas and brake pedals, under a rubber sleeve and dust cover.

Typical difficulty: Moderate — based on 60 code guides for the steering repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: TSB (NHTSA PDF) · owner fix video · owner forum · class action

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 595 complaints for the 2008–2013 Toyota Highlander. 2008 was the worst year (404 complaints). Most-reported areas: service brakes, steering, engine.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Highlander years →

Recalls

15 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2008–2013 Toyota Highlander yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.