2006–2019 Toyota Highlander Hybrid

Community-sourced DIY repair guides for the 2006–2019 Toyota Highlander Hybrid, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

12V battery drain — no-start, dark dash Owner-verified (3.3L V6 hybrid (3MZ-FE), 3.5L V6 hybrid (2GR-FXE))

Owner-side job: the 12V auxiliary battery sits under the hood (behind the passenger headlight on these years) and swaps with basic hand tools. Test before you tow.

Typical difficulty: Involved — based on 854 code guides for the battery repair area (an area-level estimate, not this exact job).

Typical time: “A 2009 owner's battery died twice in 30 days after sitting just a weekend.” — as written in the note. First-timers often take twice this.

Torque specs

Tips

Sources: owner forum · owner Q&A · owner Q&A

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2006–2019 Toyota Highlander Hybrid specifically. See NHTSA data for all Highlander Hybrid years →

Factory service bulletins

We don't have factory bulletin data for the 2006–2019 Toyota Highlander Hybrid yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.