2017–2019 Subaru Impreza

Community-sourced DIY repair guides for the 2017–2019 Subaru Impreza, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Ignition coil / ECM stall recalls Owner-verified (2.0L FB20 DI flat-4)

Dealer recall work: the dealer reprograms the ECM and replaces all four ignition coils (on the second recall). If the front exhaust pipe shows heat damage from coil overheating, that is replaced too. Nothing here is a driveway job — the value is knowing the documented route before paying for diagnosis.

Typical difficulty: Easy — based on 64 code guides for the ignition repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: repair research · repair research · repair research · repair research

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2017–2019 Subaru Impreza specifically. See NHTSA data for all Impreza years →

Factory service bulletins

We don't have factory bulletin data for the 2017–2019 Subaru Impreza yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.