2013–2014 Subaru Crosstrek

Community-sourced DIY repair guides for the 2013–2014 Subaru Crosstrek, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

FB20 oil consumption Owner-verified (2.0L FB20 flat-4 (non-direct-injection))

The fix is dealer-side: request an oil consumption test at a Subaru dealer. They fill the oil, seal it, and have you return at roughly 1,200-mile checkpoints to measure usage. If it fails, the short block is replaced under the extended coverage.

Typical difficulty: Moderate — based on 5 code guides for the oil repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: owner forum · owner forum · repair research · repair research

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2013–2014 Subaru Crosstrek specifically. See NHTSA data for all Crosstrek years →

Factory service bulletins

We don't have factory bulletin data for the 2013–2014 Subaru Crosstrek yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.