2025–2025 Rivian R1S

Community-sourced DIY repair guides for the 2025–2025 Rivian R1S, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Cruise-control markings recall (24V686, R1S only) Factory-documented (all)

2025 R1S owners: check your VIN — the dealer inspection and module swap are free and take under an hour.

Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).

Typical time: “2025 R1S owners: check your VIN — the dealer inspection and module swap are free and take under an hour.” — as written in the note. First-timers often take twice this.

Tips

Sources: Part 573 recall report (24V-686, R1S only) · recall coverage (33 vehicles, 2025 R1S) · Rivian support article (FSAM-1532)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2025–2025 Rivian R1S specifically. See NHTSA data for all R1S years →

Factory service bulletins

We don't have factory bulletin data for the 2025–2025 Rivian R1S yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.