Community-sourced DIY repair guides for the 2022–2025 Rivian R1S, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
If your R1S had rear-suspension service between April 2022 and March 2025, check your VIN and get the free bolt replacement.
Typical difficulty: Moderate — based on 27 code guides for the suspension repair area (an area-level estimate, not this exact job).
Tips
NHTSA 26V003000 / Rivian FSAM-1794 (January 2026): 19,641 model-year 2022-2025 R1S and R1T vehicles that previously had rear-suspension service. The rear toe link may have been reassembled incorrectly under an older service procedure (suspect service window April 2022 to March 2025), and the joint can separate while driving without warning, sending the rear wheel out of alignment. One single-vehicle crash was reported, and NHTSA opened investigation PE26004 into a wider population.
Rivian replaces the rear toe-link bolts free of charge; owner notification letters were mailed February 24, 2026.
Only vehicles that had rear-suspension work inside the suspect window are in the population — check your service history alongside your VIN.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 17 complaints for the 2022–2025 Rivian R1S. 2024 was the worst year (17 complaints). Most-reported areas: suspension, vehicle speed control, unknown or other.
24V367000 (23/05/2024) — EXTERIOR LIGHTING:HEADLIGHTS Rivian Automotive, LLC. (Rivian) is recalling certain 2023-2024 EDV, R1S, and R1T vehicles. The headlights may be improperly aimed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamp, Reflective Devices…
26V597000 (16/09/2026) — BACK OVER PREVENTION:SOFTWARE Rivian Automotive, LLC (Rivian) is recalling certain 2022-2027 R1S, 2022-2026 R1T, and 2027 R2 vehicles. The rearview camera image may be obstructed by a notification when in reverse. As such, these vehicles fail to comply with the requirements of Federal…
26V009000 (15/01/2026) — SEAT BELTS:CRITICAL FASTENERS Rivian Automotive, LLC (Rivian) is recalling certain 2022-2025 R1T and 2022-2026 R1S vehicles. The bolts that secure the second-row driver and passenger side seat belt retractor assemblies may be improperly tightened.
24V319000 (09/05/2024) — EQUIPMENT:OTHER:LABELS Rivian Automotive, LLC. (Rivian) is recalling certain 2024 R1T and R1S vehicles. The dashboard air bag warning label may be missing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant…
24V408000 (05/06/2024) — AIR BAGS:CRITICAL FASTENERS Rivian Automotive, LLC (Rivian) is recalling certain 2022-2024 R1T and R1S vehicles. The attachment clips on the upper B-pillar and/or C-pillar trim panels may have been damaged during a service procedure.
26V003000 (05/01/2026) — SUSPENSION:CRITICAL FASTENERS Rivian Automotive, LLC (Rivian) is recalling certain 2022-2025 R1S and R1T vehicles that previously had service performed. The toe link may have been reassembled incorrectly during service procedures performed before March 10, 2025.
7 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2022–2025 Rivian R1S yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.