2014–2024 Ram ProMaster

Community-sourced DIY repair guides for the 2014–2024 Ram ProMaster, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Sliding-door handle/cable failure Owner-verified (3.6L Pentastar V6)

Interior door panel comes off to reach the handle and cable; a video walkthrough covers the full swap in 10–20 minutes.

Typical time: “Interior door panel comes off to reach the handle and cable; a video walkthrough covers the full swap in 10–20 minutes.” — as written in the note. First-timers often take twice this.

Torque specs

Tips

Sources: DIY video · owner forum (common-problems list) · parts listing (OEM numbers)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2014–2024 Ram ProMaster specifically. See NHTSA data for all ProMaster years →

Factory service bulletins

We don't have factory bulletin data for the 2014–2024 Ram ProMaster yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.