2025–2026 Ram 5500

Community-sourced DIY repair guides for the 2025–2026 Ram 5500, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Instrument cluster blank — 12-inch display software (B4C/B8C / 25V-826) Factory-documented (6.7L Cummins Turbo Diesel, 6.4L HEMI V8)

Dealer-only recall repair — free IPC software update or full cluster replacement. Owner-side value: a 2025-2026 Ram HD whose 12-inch display intermittently goes blank is very likely this campaign — check the VIN at nhtsa.gov/recalls rather than chasing electrical gremlins.

Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: FleetOwner — recall roundup: Ram IPC display failure (B4C/B8C) · CarBuzz — Ram trucks instrument cluster recall (25V826000) · Top Class Actions — 72,000 Ram trucks recalled for blank displays

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2025–2026 Ram 5500 specifically. See NHTSA data for all 5500 years →

Factory service bulletins

We don't have factory bulletin data for the 2025–2026 Ram 5500 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.