Community-sourced DIY repair guides for the 2014–2024 Ram 3500, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Shop job — cam and lifter replacement is an engine-teardown task. Pinpointing the tick source and choosing the MDS-delete route vs stock parts is the DIY decision point.
Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).
Torque specs
Cam / valvetrain fasteners: verify — Torque spec not confirmed from a forum source — confirm against factory service info for your year before reassembly.
Tips
Yes — the 6.4 HEMI suffers the same MDS lifter failure pattern as the 5.7: the cylinder-deactivation lifters collapse and wear the cam lobes. Owners report a loud ticking/tapping at idle that tracks with engine speed.
Once the tick starts, it is a cam-and-lifter replacement, not an additive fix. One 2018 2500 owner did an MDS delete — non-MDS cam with Hellcat non-MDS lifters — for roughly $1,500 in parts and under $3,000 in shop labor.
The MDS-delete route is popular because the failure can repeat with stock MDS hardware. If the truck is a keeper, price the delete against stock replacement before authorizing work.
Rule out the simpler ticks first: low oil and broken exhaust-manifold bolts both tick. A mechanic's stethoscope on the valve cover (valvetrain tick) versus the exhaust manifold (manifold-bolt tick) tells you which one you have.
Get the exact failed bank and parts list in writing before approving a teardown — dealer quotes for this job vary widely, and 'cam and lifters' can mean one bank or both.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 294 complaints for the 2014–2024 Ram 3500. 2016 was the worst year (134 complaints). Most-reported areas: engine, fuel/propulsion system, steering.
23V799000 (28/11/2023) — STEERING:STEERING CONTROL MODULE Chrysler (FCA US, LLC) is recalling certain 2023 Ram 1500 Classic, Ram 3500 Classic, 3500 Cab Chassis, 2023-2024 Ram 2500, 4500/5500 Cab Chassis, and Ram 3500 vehicles. The steering column control module may cause the high beams to activate when…
20V511000 (27/08/2020) — ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 3500, 4500 and 5500 cab chassis built with a Cummins 6.7L High Output engine. Inadequate warmup protection can cause a lack of oil film on the engine connecting rod bearings while…
18V486000 (27/07/2018) — STRUCTURE:BODY:TAILGATE Chrysler (FCA US LLC) is recalling certain 2015-2017 RAM 1500, 2500, and 3500 pickup trucks equipped with a power locking tailgate and either a 5 foot, 7 inch or 6 foot, 4 inch bed. The tailgate actuator limiter tab may…
21V398000 (27/05/2021) — WHEELS:LUGS/NUTS/BOLTS/STUDS Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could…
22V035000 (27/01/2022) — VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 2500 and Ram 3500 vehicles, Ram 3500 Cab Chassis, 4500 Cab Chassis, 5500 Cab Chassis and 3500 Cab Chassis with a gross vehicle weight rating (GVWR) of less than 10,000 lbs…
19V021000 (25/01/2019) — STEERING:LINKAGES:DRAG:LINK:CONNECTION Chrysler (FCA US LLC) is recalling certain 2013-2018 Ram 3500 and 2014-2018 Ram 3500 Chassis Cab and Ram 2500 vehicles. The outboard steering linkage jam nut may loosen, allowing one end of the drag link to separate.
28 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2014–2024 Ram 3500 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.